RC600

View technical specifications in PDF

RC600

The RC600 is a remote control that adds both countdown and count-up functions for time control to our NTDS and TCDS clocks. Using large push buttons you select either Timer or Count-up clock. You can easily set hours, minutes and seconds. Through the start, stop and pause buttons you have full control. A clear display on the RC600 visualises your settings. See below.

Play

Button functions RC600

Standard functions

• Count up or count down to 99 hours
• Reference time from NTP, IRIG-B or SMPTE (30/25/24 fps non-drop frame)
• Generate NTP and SMPTE (30/25/24 fps non-drop frame)
• Control an unlimited number of network clocks and devices simultaneously
• Control an unlimited number of time code meters via SMPTE BNC output
• The built-in real-time clock chip with battery keeps accurate time during a power outage
• Modes include count down, count up, count to time, and clock
• 6-digit LED display

Network compatibility

• Supports NTP, DHCPv4, DHCPv6 for automatic assignment of network addresses, name servers and time servers
• Telnet or SSH communication
• IPv4/IPv6 compatible
• SNMP with custom MIB

Interface

• Network or direct communication to NTDS via RJ45
• Time code input and output via BNC connectors
• Illuminated buttons for mode selection (count up, count down, clock) and action (start, pause, reset)

Configuration

• Configure devices through the supplied WinDiscovery software or Telnet or SSH
• Configuration is stored in non-volatile memory and survives a power outage
• Authenticated network messages prevent unauthorised manipulation of clock configuration

Connectors

• RJ45 - 10/100MB Ethernet
• BNC for time code in/out
• USB for configuration
• DC input - 2.1 mm male jack

Operating parameters

• Temperature: 0 to 60 °C
• Humidity: up to 90% (non-condensing)

Warranty

• 5 year limited warranty on parts and labour

Physical

• Dimensions: 17.32w x 13.31h x 6.02d cm
• Weight: 0.9 kg
• Black powder-coated steel chassis
• Rubber feet for tabletop use

Optional

• Built-in version

Compliance

• FCC, CE, ROHS, ANSI